SkyRC S60 AC Professional Charger/Discharger stands out for its exquisite and stylish design. It can charge nearly all current battery types in the market, including new generation LiPo battery with end voltage 4.35V. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
With Built-In AC Adaptor and universal voltage AC 100-240V input, S60 charger can be used all over the world and no need additional adaptor.
If the temperature limit is reached, the process will be terminated.
With cooling fan built-in, it has better heat transfer function.
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
Depending on different kinds of batteries, there are different charging modes to meet users' request,
SKYRC S60 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting.
The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.
The user can check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance.
Automatic Charging Current Limit Capacity Limit Temperature Threshold Processing Time Limit
* The Maximum Safety makes the charger safer than B6
The charger allows user to set the charge/ discharge end voltage.
The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".